Many preparations need to be made before using the carbon steel tube heat exchanger.

       12. Equipment inspection: Carefully check the appearance of the carbon steel tube heat exchanger to confirm whether there are any problems such as collision deformation, weld cracking, etc., and whether the connection parts are firm, including whether the bolts are tightened, etc. At the same time, check whether there is any foreign matter blocking the tubes, which can be detected by methods such as the ball pass test.

       2. Cleaning treatment: Clean the surface of the carbon steel tube heat exchanger to remove oil, dust and other impurities to prevent them from entering the heat exchange tubes and affecting the heat exchange effect. For newly installed equipment, the internal anti-rust coating and debris also need to be removed.

       3. Parameter check: Clarify the design pressure, temperature and other parameters of the carbon steel tube heat exchanger to ensure that the actual use conditions are consistent with them. For example, the pressure on the steam side cannot exceed the design value to avoid safety accidents. Also check the parameters of the piping system connected to it to ensure that they match.

       4, Installation preparation: Prepare the corresponding installation tools, such as wrenches, sealing gaskets, etc. Install correctly according to the instructions, pay attention to the connection direction of the inlet and outlet pipes, and ensure that the equipment is installed on a stable foundation with enough space around it for operation and maintenance. In addition, the inlet and outlet flow direction of cooling water or heat medium must be planned in advance to ensure that it meets the process requirements.
       Please indicate the source when reprinting:http://www.qiqidian.com