ZN-CNew type concentration tank
        1,ZN-CThe type is an extended barrel separation section.
        2, in order to overcome the shortcomings of the secondary steam at the top of the concentration tank being condensed before entering the condenser and returning to the tank. This equipment changes the condenser to a horizontal type.
        3. In order to improve the production capacity of the equipment, this equipment increases the heating area of ​​the jacket of the concentration tank and the areas of the condensation and cooler to varying degrees.
        4. In order to prevent the dead angle of the liquid outlet pipe of the concentration tank, this product adopts stainless steel spherical shape.
        5. A quick-open hand hole is provided at the bottom of the concentration tank to facilitate cleaning of residual liquid and residue in the tank.
        6,ZN-CThe heating jacket is divided into two or three sections. When the liquid level is low, the upper section must be turned off to prevent drying of the wall. The bottom is changed to a cone bottom to facilitate the discharge of concentrated liquid.

project	ZN-C-200	ZN-C-300	ZN-C-500	ZN-C-700	ZN-C-1000
Evaporation cylinder solutionL	250	400	670	800	1220
Liquid cylinder volumeL	150	240	350	500	760
Evaporationkg/n	70	90	115	140	180
steam pressureMPa	<0.3	<0.3	<0.3	<0.3	<0.3
Vacuum degreekg	<60	<60	<60	<60	<60
Heating aream2	1	1.4	2	2.3	3
Condensation aream2	2.5	4	5	7	8
Equipment weightkg	630	950	1350	1700	2200
Equipment heightmm	2600	2650	3100	3270	3550
Equipment areamm	1900×620	2140×850	2300×950	2500×1000	2750×1150